This DIY (do it yourself) kit will allow you to construct a 6-bell door strap using your bells.
This particular design is intended for bells that are graduated (vary) in size. I prefer to use a top bell no larger than a #8 size (2" across) for the best results, but a #9 or #10 bell (2 1/8" to 2 1/4" across) can be used with care. As the bells step down the strap, each bell should be 1/8" to 1/2" smaller across than the bell above it. Click "See more images" to see an example of this strap kit with bells installed.
It is also important to choose bells that sound nice when rung together -- not every group of bells will make beautiful music, even if each bell sounds great alone.
The backside of this piece is fully lined with a separate layer of smooth leather. The narrow top strap has been punched with slots for the bells. We make this sturdy bell strap from USA-tanned bridle leather and solid brass hardware.
To assemble this kit, you insert a bell into its slot on the narrow "bell strap", fasten the bell in place with a wire bell pin, and lace the narrow bell strap onto its wider lining strap. Repeat this process for the rest of the bells, and lastly attach the top ring with a screw fastener. See these general assembly instructions for more information.
Overall length of the finished strap will be about 22 inches long, including the ring. The strap is 1 1/2" wide.
Kit includes the precut leather straps and these solid brass parts: six medium bell pins, one 2 1/2" ring, and one 1/4" Chicago screw fastener. Bells are not included.
Sold per kit.