We use these solid brass 10-32 machine screws, 1/2" long, and matching washers for fastening cast brass rivet-style bells onto leather about 1/8" thick.
How to use: Cut the head off each old rivet and drive the body of the rivet through the base of the bell. Use the tap to thread the now-empty hole. Punch holes as required along a leather strap. Insert a screw through a finish washer, then through a hole. Add a drop of threadlocker fluid or nail polish to the screw threads. Thread the bell onto the screw and tighten until the base of the bell is firmly seated into the leather. Do not over tighten, or you may strip the threads in the soft brass.
Sold per set of screw and washer.
Copyright © 2002-2020 - All rights reserved by Classic Bells Ltd.
Template by OS-templates.com