This strap is made to fasten into a loop to be worn around a gloved wrist or just held in the hand. It is small enough to slip into Santa's large jacket pocket.
The strap is decorated with three bright-sounding, musical sleigh bells. Two #2 (1 1/4" across) and one #3 (1 3/8") antique "petal" bells are shown at left. Click "Enlarge" to see two larger photos of these red straps, one photo of a pair of red straps with antique "round ridge" bells, and a last photo of a black wrist strap with new petal bells.
The inside of the strap is lined with a separate layer of smooth, undyed leather to minimize the chance of irritating the skin or transferring dye onto Santa's gloves. The closure is Velcro. The edges of the Velcro strips and the edges of the leather strap are sewed all around for durability.
New and antique bells are available.
Petal bells have an old-fashioned look with a cheery bright jingle.
Round ridge bells have the same shape as petal bells, but no "daisy" design. They sound similar to petal bells but tend to be a bit louder.
New solid-brass bells have a higher, louder sound than antique bells. They come in two finishes. Gold bells have a shiny gold finish. Silver bells are the same bells as the gold ones except for a shiny chrome finish.
More about our bells... and more about sleigh bell designs...
Your wrist bell strap will be similar in general design to that shown, although details may vary slightly.
Use a soft measuring tape to find the distance around your wrist, aiming for a trim but not tight fit. Be sure to wear your gloves when you measure if you normally wear gloves as Santa. To keep the strap as trim and non-bulky as possible, I recommend no more than 1/2" to 3/4" of adjustment (as shown).
If you can provide your own bells for this piece, the cost will be considerably less. We recommend using small to medium size bells (1" to 1 3/4" diameter). Larger bells will be too heavy and awkward, and their tone may be too deep to create a bright cheery sleigh-bell jingle.
Sold per each. If you want a pair as shown, please order a quantity of 2.
Made to order -- allow about 3 weeks for us to make this item using bells from our inventory. Lead time will be longer if using your bells.