This DIY (do it yourself) kit will allow you to put your bells on a black 23-bell fully lined, buckled strap.
The strap is 1 1/2 inches wide and about 84 inches (7 ft) long. It has buckles at both ends. The separate billet included with this strap adds another 8" to 18" to the length, so the assembled strap will make a loop from 92 to 102 inches around when buckled.. Longer or shorter billets may be ordered separately to fit your horse.
The strap has a full leather lining, so the backside of this piece is a separate layer of smooth leather. The lining, buckle, and leather "keeper loops" are all stitched for durability and good looks. The top strap has been punched along its length with slots for all of the bells. We make each sturdy bell strap from USA-tanned bridle leather and solid brass hardware.
To assemble this kit, you insert a bell into its slot, fasten the bell in place with a wire bell pin, slide a leather keeper loop onto the strap, insert the next bell into its slot, and repeat until all your bells are fastened onto the strap. See these general assembly instructions for more information.
The strap will look best with medium to large bells that graduate in size. Click "See more images" to see an example of this strap with bells installed.
Kit includes the finished black leather bell strap, 22 leather keepers, 23 large bell pins, and a billet. Bells are not included. You provide the bells and simple tools and install your bells on the strap.
Sold per kit.